Materials Management interview questions

1. A.classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
2. B.bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months
3. C.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
4. D.site requisition stating quantity, specification and required date raised from BOQ and consumption norms, approved before a purchase order is placed

Answer + AI explanation with Pro

1. A.Goods receipt note
2. B.Cement storage
3. C.Steel stacking
4. D.Indent

Answer + AI explanation with Pro

1. A.Indent — site requisition stating quantity, specification and required date raised from BOQ and consumption norms, approved before a purchase order is placed
2. B.Indent — each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil
3. C.Indent — bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months
4. D.Indent — card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end

Answer + AI explanation with Pro

1. A.bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
2. B.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
3. C.record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
4. D.bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months

Answer + AI explanation with Pro

1. A.Steel stacking
2. B.Cement storage
3. C.Indent
4. D.Goods receipt note

Answer + AI explanation with Pro

1. A.Goods receipt note — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
2. B.Goods receipt note — site requisition stating quantity, specification and required date raised from BOQ and consumption norms, approved before a purchase order is placed
3. C.Goods receipt note — record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
4. D.Goods receipt note — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10

Answer + AI explanation with Pro

1. A.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
2. B.record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
3. C.classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
4. D.bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months

Answer + AI explanation with Pro

1. A.Goods receipt note
2. B.Steel stacking
3. C.Aggregate stacking
4. D.Cement storage

Answer + AI explanation with Pro

1. A.Cement storage — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
2. B.Cement storage — card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
3. C.Cement storage — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
4. D.Cement storage — bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months

Answer + AI explanation with Pro

1. A.bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months
2. B.bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
3. C.card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
4. D.each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro

1. A.ABC analysis
2. B.Reinforcement acceptance testing
3. C.Cement storage
4. D.Steel stacking

Answer + AI explanation with Pro

1. A.Steel stacking — each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil
2. B.Steel stacking — bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
3. C.Steel stacking — bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months
4. D.Steel stacking — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list

Answer + AI explanation with Pro

1. A.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
2. B.record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
3. C.bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
4. D.ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list

Answer + AI explanation with Pro

1. A.Steel stacking
2. B.Reinforcement acceptance testing
3. C.Aggregate stacking
4. D.Goods receipt note

Answer + AI explanation with Pro

1. A.Reinforcement acceptance testing — card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
2. B.Reinforcement acceptance testing — record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
3. C.Reinforcement acceptance testing — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
4. D.Reinforcement acceptance testing — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10

Answer + AI explanation with Pro

1. A.ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
2. B.bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
3. C.each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil
4. D.classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules

Answer + AI explanation with Pro

1. A.Bin card and stock ledger
2. B.Cement storage
3. C.Aggregate stacking
4. D.Long-lead procurement

Answer + AI explanation with Pro

1. A.Aggregate stacking — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
2. B.Aggregate stacking — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
3. C.Aggregate stacking — bars kept on racks or sleepers off the ground by diameter and grade, tagged with heat number and mill certificate, cleaned of loose rust before use
4. D.Aggregate stacking — each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro

1. A.classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
2. B.card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
3. C.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
4. D.each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro

1. A.ABC analysis
2. B.Bin card and stock ledger
3. C.Long-lead procurement
4. D.Aggregate stacking

Answer + AI explanation with Pro

1. A.ABC analysis — record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
2. B.ABC analysis — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
3. C.ABC analysis — classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
4. D.ABC analysis — bags on a raised dry platform at least 300 mm clear of walls, stacked not over 10 high, issued first-in first-out and retested if older than 3 months

Answer + AI explanation with Pro

1. A.tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
2. B.site requisition stating quantity, specification and required date raised from BOQ and consumption norms, approved before a purchase order is placed
3. C.card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
4. D.each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro

1. A.Bin card and stock ledger
2. B.ABC analysis
3. C.Goods receipt note
4. D.Reinforcement acceptance testing

Answer + AI explanation with Pro

1. A.Bin card and stock ledger — classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
2. B.Bin card and stock ledger — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
3. C.Bin card and stock ledger — card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end
4. D.Bin card and stock ledger — each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro

1. A.ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
2. B.classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
3. C.record made on delivery after checking quantity and quality against the purchase order and challan, updating stock and releasing vendor payment
4. D.card at the stack showing receipts, issues and balance, reconciled with the store ledger and physically verified at month end

Answer + AI explanation with Pro

1. A.Goods receipt note
2. B.Reinforcement acceptance testing
3. C.ABC analysis
4. D.Long-lead procurement

Answer + AI explanation with Pro

1. A.Long-lead procurement — ordering bearings, lifts, prestressing strand and specialised items months ahead from the look-ahead schedule, using only makes on the client-approved list
2. B.Long-lead procurement — classing stock so the few high-value items such as steel and cement get tight control while numerous low-value consumables get simple reorder rules
3. C.Long-lead procurement — tensile, bend and rebend tests on samples from each lot to IS 1786, with Fe500D requiring 16 percent elongation and a strength ratio of at least 1.10
4. D.Long-lead procurement — each size stored separately on a hard drained platform with dividing walls to prevent mixing, segregation and contamination by soil

Answer + AI explanation with Pro